DAHAO BECS-285A Owner's Manual page 36

the parameters, please firstly press
embroidery confirmation status (
key to embroider, which means the machine is in embroidery running status (
at main interface).
In embroidery running status (
stop machine, now the machine is in embroidery confirmation status (Again, presses the start
key to start the machine, the machine goes into embroidery running status).
In embroidery confirmation status (
and then press
preparation status (
26
Chapter 2 Embroidery Guide
, then press
is displayed at main interface). Finally, presses the start
is displayed at main interface). Presses the stop key to
is displayed at main interface), firstly press
to release embroidery confirmation status. Now the machine enters
is displayed at main interface).
Owner's Manual of BECS- 285A Computerized Control System
. Now the machine is in
is displayed
,