DAHAO BECS-285A Owner's Manual page 87

The operation key is divided into 8 rows in the screen, the first three rows are the function
keys for adjusting the arrangement of the letters(for whole rank), the second three rows are the
keys for adjusting the selected letters, and the last two row are the function keys for the
function of view and files. The centre of screen is the area to show letter design.
Generally, user should set the parameters, such as whole arrangement method of letter
string, rotate angle of letter string and interval of letter string (The keys of the first three rows
at the right side of the screen); select the very letter, and then adjust the arrangement parameter
of that individual letter.
Letter design display window: the crosses at centre are the coordinate; intersection is
origin (0,0). The letter rank surrounds the origin automatically.
2. View and File Operation
"Stitch Form": show/hide the stitch form. Hiding the stitch form can improve
operation speed.
"Move": Move the letter design manifestation window, to check different part of the
design. Clicking this key can show or hide the 5 direction keys that are used to move the
diagram.
"Left", "Right", "Up" and "Down": Move letter design toward each
Owner's Manual of BECS- 285A Computerized Control System
Chapter 8 Letter Design Operation
77