DAHAO BECS-285A Owner's Manual page 125

Chapter 11 About JF Sequin Embroidery
Setting method:
a) Click
names are A, B, C and D. If all these four sequins are included, A will be on the top, then
B, C and D.
b) After that, press
ask user to input the number of sequins fed. Click the number keys to input the number
(Range: 0~9999). If a sequin group is only used for one stitch at the embroidery cycle, user
will need to input "1" and then press
c) Click
becomes "0". Press
For instance, if the current sequin mode is A2ABCD1CD1, the design will be like the
one at below:
Owner's Manual of BECS- 285A Computerized Control System
or to select sequin mode and click
to confirm the sequin-feeding mode. Then the system will
.
or until you see "END" in the blank or the feeding number
to finish the setting.
to confirm. Sequin
115