DAHAO BECS-285A Owner's Manual page 137

Chapter 12 Operation of Zigzag Embroidery
(Refer to the parameter: Swinging scope of frame in Zigzag sewing)
(2)Automatic Shift
Before embroidering, automatic shift can be achieved through setting the color-changing
position.
In the main interface, press "
the key (zigzag head) to change zigzag embroidery mode:
Press the corresponding icon to select the very zigzag embroidery mode, if you don't want to
change, and then press
setting of color-changing order, the system will display as below:
The icon means the manual shift status. But the setting in
when system is in automatic shift state.
Owner's Manual of BECS- 285A Computerized Control System
" to enter into color changing interface, and then press
to exit. After confirmation of the embroidery mode and the
will still be in effect
127