Set The Observed Settings (Source) - GE Druck DPI 620 User Manual

Issue 1
Percent Step
1
TAP
Defined Step
1
TAP
Ramp
1
TAP
2.11.3 Set the Observed settings (source
2-16 Prepare the instrument
Description
Process: Percent Step;
Values to set: Low, High, Step Size (%FS), Dwell,
Auto Repeat (On/Off)
Use these buttons to change the value manually by the
specified Step Size.
Use the start and stop buttons to change the value
automatically by the specified Step Size.
Dwell sets the period between each change.
Description
Process: Defined Step;
Values to set: Low, High, Step Size, Dwell, Auto Repeat (On/Off)
Use these buttons to change the value manually by the
specified Step Size.
Use the start and stop buttons to change the value
automatically by the specified Step Size.
Dwell sets the period between each change.
Description
Process: Ramp;
Values to set: Low, High, Travel, Dwell, Auto Repeat (On/Off)
Use the start and stop buttons for this process. Travel
sets the duration of the Ramp.
Dwell sets the period between each change in direction.
)
The Observed function is available as a Source on five of the
task selections: CH1, CH2, P1, P2, and IDOS. To set the
Observed function, see Section 2.10.4.
K0449 - [EN] English