Set The Automation Options (Source) - GE Druck DPI 620 User Manual

Scaling:
1
2.11.2 Set the Automation options (source
Nudge
1
TAP
Span Check
1
TAP
[EN] English - K0449
3
2
Previous: Back one display
Home: Back to start
Note: Section 2.9 (Display operation)
change the values on the display.
Description
Process: Nudge; Values to set: Step Size
Use these buttons to increase or decrease the output
value. Increments = Step size.
Use this button (Setpoint) to set the output value.
Description
Process: Span Check; Values to set: Low, High, Dwell
Use these buttons to change the value manually from
High to Low.
Use the start and stop buttons to change the value
automatically from High to Low.
Dwell sets the period between each change. The cycle
repeats automatically.
Set On or Off
Set a label name
)
shows how to set and
Prepare the instrument 2-15
Issue 1
Set a scale for
Point 1 and
Point 2