1.3 The display
a
1
c
d
e
2
g
3
4
Figure 1-6: Example
display
[EN] English - K0449
This is a LCD with a colour display and a touch-screen. To
make a selection, lightly tap on the applicable display area with
a finger; see
Section 2.9 (Display
1.
Status bar: This includes:
b
a. Battery indicator
c. Indicators for a Pressure connection, a HART protocol
f
resistor, an IDOS connection, Datalog and wireless
operation; for example:
: Pressure;
h
2.
CH1: Window for the channel 1 settings and values; see
Section
2.10.
d. Measure or source indication:
: Measure;
e. Function (voltage, current, pressure ...)
f.
Source process indicator; for example:
: Nudge;
g. Full scale (FS) range
3.
Other windows: The number of windows you see on the
display is set by the number of task selections and external
modules you are working with (maximum: 6); see
4.
Tap this button to set up the Task, set up the instrument
(Configure) and to access Help (?). see
(Menu
sequence).
5.
Tap this button to maximise each of the available
windows in sequence; see
6.
Pause (II) or Play (X): Tap (II) to hold (freeze) all the data on
the display. To release the display and continue, tap (X).
operation).
b. Date and time
: HART;
: IDOS
: Source
: Span check;
: Ramp
h. Function units
Section 2.10
Section 2.9.4
Instrument parts, accessories and options 1-3
Issue 1
Section
2.9.