Issue 1
2.10.1 Procedure to set the basic operations:
Configuration
3
2
1
TAP
Settings
3
2.10.2 Procedure to see the instrument status
Configuration
2
1
TAP
2-8 Prepare the instrument
Description
A
Status: On or Off
Timeout: 00:02:00 to 01:00:00 hours:minutes:seconds (hh:mm:ss)
B
Timeout: 00:02:00 to 02:00:00 hours:minutes:seconds (hh:mm:ss)
Intensity: 20, 40, 60, 80, 100%
A
B
C
C
D
Date: day/month/year (dd/mm/yy) OR month/day/year (mm/dd/yy).
E
The format is factory configured.
Time: 24 hour;
hours:minutes:seconds (hh:mm:ss)
D
Selected: English (Other languages to be released).
E
Volume: Mute, Low, Medium, High.
Status
3
Sets the power off automatically after the
specified Timeout period. To save the battery
power, set this to On.
Sets the backlight. Low values save battery
power; see
Section 2.5.5 (Operating
Sets the date and time. The calibration function
uses this to give calibration messages.
Sets the language.
Sets the volume of the tones and alarms.
The date of the next calibration
Charging or Battery Powered, and the amount of
charge in 1% increments
The amount of memory available (in MB and as a
% of the total on the device): internal memory;
USB memory; micro SD card
time).
K0449 - [EN] English