Adjusting The Display Brightness And Timeout - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual
Moving the platform
The system controls the movement of the platform in normal operating. In the case that you will need to move
the platform to the top or the bottom, follow the procedures below.
1. From the main menu, go to
[SETTINGS] > [Platform].
3. Wait while the platform is moving.

Adjusting the display brightness and timeout

Screen backlight enhances the readability of the content of the display. You may adjust the brightness and screen
timeout based on your preferences.
1. From the main menu, go to
[SETTINGS] > [General].
3. To adjust the screen brightness, drag or tap on the slide bar directly. Drag the slider left to decrease the
brightness, and vice versa.
To adjust the screen timeout, select the options at the bottom.
4. Tap to exit the function.
2. Select [Go Top] to move the platform to the top or select [Go Bottom]
to move the plate to the bottom.
4. Press to exit the function.
2. Select [Display].
23