Converting To The Production Files; Exporting The Files - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

CONVERTING TO THE PRODUCTION FILES

Exporting the files

When finishing editing the files and the supports, click on [Export] to save the model to a sliced .3wn file. Once
the file is sliced, you may skip repeating settings in the future.
To export the file:
1. Click [Export] icon.
 Material: Printing setup varies based on the color and
material of the resin. Please set the option based on the
resin bottle to be used.
It is advised to include color setting in filename for instant
distinction in the future.
Please note that printing will be stopped if the selected
resin type doesn't match the resin installed.
 Resin Model: [Resin Model] can be found under [RESIN]
on the printer screen and on the serial number label on
the resin bottle.
 Layer Height: Layer Height indicates the resolution of a
print at Z axis.
2. Setup below settings based on the printing quality
required and the resin material will be used, and click
[Export] to slice the file.
 Quality: The setting of Quality has impact on the
smoothness of the surface of the printout. Printing with
Good quality will take slightly longer than normal printing.

 To Printer: Printing parameters vary from printer models.
Select [PartPro150 xP] for using this printer.

 Reduce Facets: Complex 3D models are composed of a
large amount of meshes. Enable this function for slicing
such models may save the render time as it will reduce the
facets to 200 thousand elements. This function can also
repair the 3D model when necessary.
46