Supported File Format; User Interface - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

SUPPORTED FILE FORMAT

The system accepts below file formats. The source files should be converted into .stl format in your CAD program.
The source files should be sliced and converted into ".3wn" formats for production. For file conversion, please
utilize the software "XYZprint AM
File Format
STL Format
3WS format
3WN Format

USER INTERFACE

The printing system is operated using the touch panel on the printer and the software "XYZprint AM
need to switch between the different interfaces based on your operation.
Refer to below table for the functions available on each user interface:
Category
File Preparation
Printing Controls
File Management
System Configuration
Info Display
UV
".
The file format is native to CAD software. It is widely used for 3D printing. Please
always export your design files into .stl format in your CAD software to print on this
printer.
You can also save the objects on the platform into a single stl file.
.3ws is a proprietary file format for the printer, for saving all models on the workspace
as a project with the data of geometry, orientation, placement, dimensions and
support settings. You can further edit each object in the .3ws file.
.stl files need to be sliced into layers for printing. The sliced files are in .3wn format.
You will always prepare .3wn files with "XYZprint AMUV".
Function
Preparing the files
Printing new files
Printing from the history
Pausing the production
Resuming a paused task
Canceling the production
Deleting files on the printer
Configuring printer settings
Configuring the connectivity
Updating printer firmware
Production History
Printer Status
Material Status
System Version
Machine Statistics
Description
Touch Panel













15
UV
". You will
UV
XYZprint AM










