Overall Workflow - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

OVERALL WORKFLOW

The overall workflow for using PartPro150 xP is illustrated in the following chart. Refer to the explanation of each step in the
relevant chapter.
Ready for
Printing
Printing
Post-processing
3D design with CAD software and export the models into stl format
Prepare the production files with XYZprint AM
› Manipulate the models – P.38
› Edit the supports for overhangs – P.40
› Export and slice the models – P.46
Start the production
› with new models – P.47
› from the print history – P.20
Printing controls – P.30
› Monitor the progress – P.30
› Pause the printing – P.30
› Resume the paused task – P.31
› Cancel the printing – P.31
› Switch off auto-refilling – P.31
Clean up the printed models from the platform – P.50
Post-process the printed models – P.51
Maintenance – P.52
UV
18