XYZ Printing PartPro150 xP Operation Manual page 40

Version 1.0
PartPro150 xP Operation Manual
Function
2 Top Bar
Import
Export
Save
Print
Setting
About
3 Right-click Menu
Land
Scale up (mm>inch)
Scale down
(inch>mm)
Reset
Remove
Info
New Workspace
4
Printer Monitor
Refer to the following chart for the code of "When Enabled".
A
When the software is launched
B
One or more objects are added to the workspace.
C
An object is selected.
D
One or more objects are selected.
E
After an undo request.
Description
Import models in .stl/.3ws/.3wn format to the workspace.
Slice the models on the workspace and export to .3wn
format.
Save the models on the workspace as .stl or .3ws file.
Setup printing preference and send the objects for printing
Set up interface language, display unit, printer model, fine-
tuning printout dimensions, and enable/disable auto-
position.
Display the version number of the software and the
machine, and the information of the resin bottle installed on
the printer. The function is also used for software and
firmware update.
Land the model on the workspace.
Change the display unit of the selected model from
millimeter to inch.
Change the display unit of the selected model from inch to
millimeter.
Reset the edit of positioning, rotation and scaling and delete
the supports.
Delete the model on the workspace.
Display the information on the model's file name, file
format, position on the workspace and size.
Delete all models on the workspace.
Set up printer connection and monitor the status of the
printer.
34
When Enabled
A
B
B
B
A
A
C
C
C
C
C
C
A
A