Start Printing From The History; Managing The Printing History - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

Start printing from the history

1. From the main menu, go to [PRINT], tap a history entry from the list view or thumbnail view.
[List View]
2. Review the printing settings. Tap [PRINT] to initial the production.
If the resin bottle installed doesn't match the resin type of the selected file, the system will highlight the issue with a
warning sign . Production is prohibited in this case.

Managing the printing history

1. From the main menu, go to [PRINT], and select a single entry (tap the checkbox before each entry) or select all entries
(tap the checkbox by the header).
[List View]
2. Tap the [Delete] icon.
[Thumbnail View]
Model_01
[PRINT] button is disabled while the system is reading the slicing
information from the history. Allow a few second before tapping the
[PRINT] icon.
[Thumbnail View]
3. Tap [Confirm] to proceed to
deletion.
20
Tap to enlarge the thumbview.