Display And Control Panel - XYZ Printing da Vinci 1.0 Pro User Manual

Hide thumbs Also See for da Vinci 1.0 Pro:

User manual (23 pages)

Quick manual (12 pages)

Table Of Contents

Table of Contents

da Vinci 1.0 Pro

Notes and Description for Use of Maintenance Tools

•

The following tools can be used only in an environment with guidance or monitoring by adult. Do not allow

children to obtain maintenance tools in unfamiliar situations in order to avoid danger.

•

Please make sure to maintain the printer as the bed is cooled.

•

After print is finished and the print bed is cooled to room temperature, the printing object may be taken off with Scraper.

• In order to prevent print quality from impact due to residual and accumulated filament, which results in

poor discharge, after long-term use of print nozzle, it is recommended to enable the "CLEAN NOZZLE"

(nozzle cleaning) function of the printer every 25 hours of print to clear residuals with nozzle cleaning

wire.or feeding path cleaning wire. (Filament should be unloaded from the extruder before cleaning

the feeding path.)

•

Filament residuals produced during print may also attach onto nozzle and gear of print module to influence print

quality, printer operation, as well as measurement result of bed. For such situation, please use cooper brush to

clean the print module.

Maintenance and Service

●

Keep original packaging material in the event of sending your unit back for repair during the

warranty period. If other packing materials are used instead, the print-er may be damaged during the

transportation process. In such situation, the XYZprinting the right to charge repair fee.