XYZ Printing Nobel 1.0 Product Manual
  1. Manuals
  2. Brands
  3. XYZ Printing Manuals
  4. 3D Printers
  5. Nobel 1.0
  6. Product manual

XYZ Printing Nobel 1.0 Product Manual

Hide thumbs Also See for Nobel 1.0:
Table of Contents

Advertisement

Quick Links

Nobel 1.0 3D Printer
Product Manual
ENGLISH
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
-1-
V1.5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Nobel 1.0 and is the answer not in the manual?

Questions and answers

Related Manuals for XYZ Printing Nobel 1.0

Summary of Contents for XYZ Printing Nobel 1.0

  • Page 1 Nobel 1.0 3D Printer Product Manual ENGLISH FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 2: Safety And Compliance

    Read the following safety instructions and contents of this manual before use, operation, maintenance, replacement or removal of any parts, components, or materials of the printer. For the latest information about the Nobel 1.0 3D Printer and XYZprinting products, please visit XYZprinting website (http://www.xyzprinting.com) or contact your sales representative.

  • Page 3: Unpacking And Setup

    Unpacking & Setup After removing all external packing materials and tapes… ⑤When the platform is moved to the top, remove the protecting foam. ⑩Install filling tubes. ①Take off the lid and remove the accessory tray over the platform. ⑥Unpack the resin tank and insert it into the tank slot.
  • Page 4 Use the Display and Control Panel To control and maintain the printer, you will need to operate certain functions with buttons on the control panel. Here is the map of the buttons: Move up Home menu nobel 1.0 ►UTILITIES Next page SETTINGS...
  • Page 5 LCM Menus UTILITIES “Utilities” menu provides the control of the printer. You can instruct to fill the resin tank manually, and calibrate the printer when necessary. INSTALL RESIN You can activate resin-filling function manually. Before doing so, make sure the resin bottle, resin tank and the lid are installed correctly.
  • Page 6 MOVE PLATFORM Activate the function when you need to move the platform manually. Simple select move the platform “to top” or “to bottom” to proceed: MOVE PLATFORM MOVE PLATFORM TASK COMPLETE TO TOP TO BOTTOM NOW? ►TO BOTTOM ►YES [OK] TO FINISH SETTINGS The Settings menu alows you to adjust printer settings.

  • Page 7: System Version

    ENERGY SAVE LED backlight of the LCM enhances the readibility of the content of the display. To save energy consumed, the backlight will go off after the printer idles for 3 minutes (shown as 03M on the display) by default. To set a longer time interval: ENERGY SAVE [OFF] ►OFF...

  • Page 8: Print From Usb

    Import objects in .stl/.3wn format: Open file browser and select the .stl or .3wn files to print. ".3wn" format is sliced by XYZware_Nobel based on the printer type selected. For the file set to slice for printer type other than "Nobel 1.0", XYZware_Nobel may not import it.

  • Page 9: Operation Flow

    -5% to +5%. The setting is stored in the software. Make sure to adjust the setting before printing from the another Nobel 1.0 3D printer. Info/Software & firmware update: Apply printer firmware and XYZware_Nobel updates when prompt by the software for stable printing perfor- mance.
  • Page 10 Check Before Every Print Check the following items before printing to ensure printing quality and the operation of the printer. ① Remove any residue or dust from the platform and tank with the scraper, filter or other tools. ② Mop the fingerprint or resin under the tank or on the glass with with lint-free cloth dampened with alcohol. ③...
  • Page 11 Printed Object Removal and Cleaning Resin Tank Cleanup When removing prints from the printer, follow the procedure To remove any residue stuck to the bottom of the resin tank, to post-process the object and maintain your printer. clean the tank level sensor covered resin, or to clean the tank thoroughly, follow the procedure for cleaning: ①...

  • Page 12: Specification

    To ensure the durability of hollow prints, leave a weep hole at the bottom of your 3D design, so you can empty the uncured resin easily. Specification Nobel 1.0 3D Printer Print Technology Stereolithography (SL) Connectivity USB Wire & USB drive UV Light Source UV Laser λ...
  • Page 13 ● Error Code 1001: Z axis motor upward movement abnormalities or Z axis top sensor malfunctioned Suggestion: Select "INFO">"SENSOR STATUS" on the printer, touch Z axis top sensor, and see if the status of "Z-T" switches from 0 to 1. If the value doesn't switch accordingly, then the sensor is malfunctioning.
  • Page 14 ● Error Code 2001: Resin bottle not found Suggestion: Make sure resin bottle is placed correctly and NFC tag is in place under the bottle. If the NFC label is missing, please contact customer service center. ● Error Code 2002: UV laser module not calibrated Suggestion: Contact customer service center directly.

Table of Contents