Product Overview; Appearance - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

2. PRODUCT OVERVIEW

APPEARANCE

 Front View - Exterior
 Rear View
Component
D
Ethernet Port
E USB Wire Port
F
Power Jack
G Power Switch
H
Platform Rack
I Tank Slot
J
Wiper Shaft
K Cartridge Slot
L
Filling Tube
M Pumping Tube
Component
Front Cover
Side Cover
Touch Panel
Attach the Ethernet cable to the port to connect the printer to the Ethernet.
Attach the USB cord to the port to connect the printer to the PC.
Connect the supplied power adapter to the socket to power on the printer.
Press the switch to power on or off the printer.
The printing platform to hold the printed parts during printing.
The tank slot holds the resin tank on the printer. Insert the resin tank into the slot while
completing the installation.
The wiper shaft holds the wiper on the printer.
Resin bottle should be inserted into the slot to connect to the refilling system.
Resin runs through the filling tube when auto-refill is enabled.
Air flows into the resin bottle through the pumping tube to push out the material when filling.
Description
Open this cover to take out printed model or perform regular
maintenance.
Keep the front cover securely closed during printing.
Access the resin bottle through the side cover.
Contains a screen and keys for machine control.
 Front View - Interior
Description
11