Resuming The Paused Task; Canceling The Printing; Switching Off Auto-Refilling - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

Resuming the paused task

Before resuming the paused task, make sure the resin bottle is installed correctly and the front and the side
covers are closed securely. Tap the [RESUME] button and wait while the system resuming the printing.

Canceling the printing

You can cancel the printing anytime if necessary.
To cancel the printing:
1. Tap [CANCEL].
4. Tap [CONFIRM] again when the
system has finished the process.

Switching off auto-refilling

The setting of auto-refilling can be changed during printing.
To adjust the setting, tap
2. Tap [CONFIRM] on the next page.
5. Clean up the model on the platform and tap [CONFIRM] to close the message.
th
3 times to go to the 4
>>
3. Wait while the system is processing
page, and tap the ON/OFF button.
31
the request and moving the
platform to the top,