Connecting To A Hidden Wi-Fi Network - XYZ Printing PartPro150 xP Operation Manual

Version 1.0
PartPro150 xP Operation Manual

Connecting to a hidden Wi-Fi network

1. From the main menu, go to
[SETTINGS] > [General].
4. Swipe to the bottom of the list of
available Wi-Fi connections, and
tap [Add Network].
6. Tap [Security] dropdown list and choose the security type. If you're not sure about the security of your network, check
with your network administrator.
XYZ-0001
None
7. Enter the network password in the [Password] field, and tap
XYZ-0001
WPA/WPA2 PSK
8. Connection is set up when the hidden network is added to the list with a tick appears at the left side. Tap
function.
9. Once Connect to Wifi, the right side top of the main menu will appear a client IP address icon.
2. Tap the wireless connection icon
to enable the function. Skip this
step if the icon is shown in green.
5. Enter the exact name of the network in the [Network Name] field and tap
to go back to the setting page.
None
to join the network.
***|
26
3. Tap [Wireless] to enter the setting.
X|
XYZ-00001
WPA/WPA2 PSK
*********
to exit the