XYZ Printing PartPro150 xP Operation Manual page 14

Version 1.0
PartPro150 xP Operation Manual

To install the Resin Bottle:
1. Shake the resin bottle well to ensure even color.
For the material with dense pigment, you may
need to tilt the bottle at 45° for 5 minutes, and
then shake the bottle for around 5 minutes.
3. Replace the sealing cap with the
assembled nozzle cap.
6. Attach the exhaust tube to the thin nozzle. Find
the black filling tube on the left side of Z-axis
and attach it to the thick nozzle. Push the tubes
all the way down.
7. Close the side cover.
2. Assemble the nozzle cap and
4. Push to open 5. Insert the resin bottle into the
the side cover.
Be sure to run the filling tube from the back of Z-axis to the
nozzle cap while installing the cartridge. The platform will
be trapped if the tube goes from the front.
8
the inner tube.
bottle slot.