Product Overview - XYZ Printing da Vinci Jr.1.0w User Manual

Product Overview

view
Accessory Checklist hecklist
．Guide tube ．Feeding Path
Cleaning Wire
．Cleaning Brush ． Scraper
Important Safety Instruction for Use of Maintenance Tools
• The maintenance tools provided should be only handled by an adult. Please keep the tools away
from children.
• Store the gear cleaning brush properly. This tool shall only be used to clean the specifi ed parts of the
machine and should not be used for the cleaning of other parts to prevent damaging the machine.
• The scraper is used to remove the object from the print bed when printing has fi nished. The bed tape
is reusable and it can be replaced when it has worn out.
Important Safety Instruction
• Do not place the printer in humid or dusty environment such as bathrooms and high traffi c areas.
• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or
tumble and it may cause serious injury.
• Please keep the front door closed during printing to avoid injury.
• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.
．Cleaning Wire x 5
． ．Power Adapter
SD Card
．USB Wire ．Bed Tape X 3pcs
．Power Cord
da Vinci Jr.1.0
September 2015
Ver. 1 Ver. 1.6
A: Filament movement area A: Filament m
B: Feed module B: Feed modu
C: Detector C: Detector
D: Extruder D: Extruder
E: Filament E: Filament
F: Print bed F: Print bed
G
G: SD card p G: SD card port
(Storage format: FAT32) (Storage form
H: Control and display panel H: Control and
I: Front cover I: Front cover
USB Port
Power Connector
Power Switch
．Filament spool axle ring
．Bundled fi lament
P 3