Komatsu WA800-1 Operation & Maintenance Manual page 82

EVERY 100 HOURS SERVICE
3.
*
Align the direction of the arrows
and assemble.
Direct dry compressed air (less
than 7 kg/cm? to element from
inside along its folds, then direct
it from outside along its folds and
again from inside, and check
element.
A
When using compressed air,
wear safety glasses and other
things required to maintain
safety.
W-04298
c. LUBRICATING
Apply grease to the grease fit-
tings shown by arrows.
1 Lift arm pivot pin (2 points)
2. Dump cylinder pin (2 points)
3. Tilt lever pin (I point)
4. Bucket link pin (1 point)
,, ,, ,,,., ,, ,,,,,, ,,,,,,,,,
-81 -