Komatsu WA800-1 Operation & Maintenance Manual page 42

e. CHECK FUEL LEVEL AND
REFILL FUEL
f.
CHECK BEFORE STARTING
CHECK ELECTROLYTE LEVEL
IN BATTERY
1.
2.
Check the fuel level using fuel
gauge (G) on the monitor panel.
Upon completion of work, pour
in addition fuel from filler (F) until
the fuel tank is full.
* Fuel capacity: 1200 II
* When adding fuel, never let the
fuel overflow. This may cause a
fire.
Open the battery box covers.
If the electrolyte level is lower
than the prescribed level (IO to
12 mm above the plate), supply
distilled water.
Should any of the acid be spilt,
have it replenished by the nearest
battery shop with acid of the cor-
rect specific gravity.
When inspecting electrolyte
level, clean the air hole of the bat-
tery cap.
W-04278
-41 -