Komatsu WA800-1 Operation & Maintenance Manual page 112

WHEN REQUIRED
f. LUBRICATING
Rear
Apply grease to the grease
fittings shown by arrows.
1. Work equipment control valve
2. Accelerator pedal linkage
linkage
(2 points)
(2 points)
If the work equipment control
If the accelerator pedal is heavy
lever is heavy or does not move
or does not return properly, apply
smoothly, apply grease.
grease.
* The type of lubricant used
depends on the
ambient
temperature. Select according to
the table "FUEL, COOLANT AND
LUBRICANTS".
- 112-
W-04322