Komatsu WA800-1 Operation & Maintenance Manual page 25

INSTRUMENTS AND CONTROLS
PEDALS AND LEVERS
1. ACCELERATOR PEDAL
2. BRAKE PEDALS
This pedal controls the engine
Right brake pedal
speed and output. The engine speed The right brake pedal operates
can be freely controlled between
the wheel brakes, and is used for
low idling and full speed. normal braking.
A
On hills, use the right brake
pedal or use the left pedal with
the transmission cut-off selec-
tor switch put in OFF.
- 24 -
Left brake pedal
The left brake pedal operates the
wheel brakes, and if the transmis-
sion cut-off selector switch is at
ON, it also returns the transmission
to neutral.
If the transmission cut-off selec-
tor switch is at OFF, the left brake
pedal acts in the same way as the
right brake pedal.
A
Do not use the brake pedals
repeatedly unless necessary.
A
Do not use the brake pedals as
footrests. Use them only when
applying the brakes.
* When the accelerator is being
used for operating the work
equipment, always use the left
brake pedal to slow or stop the
machine after putting the trans-
mission cut-off selector switch in
ON.
ww -02022