Komatsu WA800-1 Operation & Maintenance Manual page 12

INSTRUMENTS AND CONTROLS
5. COOLANT TEMPERATURE
MONITOR
6. TORQUE CONVERTER OIL
TEMPERATURE MONITOR
7.
This monitor indicates a rise in
the cooling water temperature.
When the monitor lamp flashes,
run the engine with no load at mi-
drange speed until the green range
of the engine water temperature
gauge lights.
This monitor indicates a rise in
the torque converter oil temperature.
When the monitor lamp flashes,
stop the machine and run the
engine with no load at midrange
speed until the green range of the
temperature gauge lights.
Sr Park the machine on level ground and check the monitor lamps.
* Confirm that these monitor lamps light for about 3 seconds after turning
the starting switch to ON. If any monitor lamp does not light, ask your
Komatsu distributor to inspect that monitor lamp.
EMERGENCY STEERING
OPERATION MONITOR
If the engine stops while the ma-
chine is traveling or an abnormality
occurs in the pump circuit, the oper-
ator will be warned that the
emergency steering is in operation.
When flashing begins, stop the ma-
chine immediately.
w-02011
-
11 -