Komatsu WA800-1 Operation & Maintenance Manual page 111

WHEN REQUIRED
d. CLEAN RADIATOR FINS
Carry out this procedure if there
is any mud or dirt seen stuck to the
radiator.
1. Loosen bolt (1) and remove
radiator grille (2).
2. Clean the radiator fins and oil
cooler fins clogged with mud,
dust and leaves with compressed
air. Steam or water may be used
instead of compressed air.
e. CHECK AND REFILL AXLE OIL
Carry out this procedure if there
is any sign of oil on the axle case.
Front
* The rubber hose should be
checked at the same time. If the Remove oil level plug (I), and
hose is found to have cracks or
check that the oil level reaches the
to be hardened by ageing, such bottom of the plug hole. If
hose should be replaced by new
necessary, add oil through the hole
one. Further, loosened hose of plug (I 1.
clamp should also be checked.
w-04321
-lll-