Komatsu WA800-1 Operation & Maintenance Manual page 41

CHECK BEFORE STARTING
A
Do not remove the cap while
cooling water is hot. Hot water
may spout out.
Before removing radiator cap,
turn cap slowly to relieve inner
pressure.
d. CHECK OIL LEVEL AND REFILL
IN ENGINE OIL PAN
the rear left side of the machine.
2. Use dipstick (G) to check the oil
level.
3. The oil level should be between
mark L and H, if necessary, add
oil at oil filler (F).
1. Open the inspection 'window at
t When checking the oil level, park
the machine on a level surface,
stop the engine and wait for 15
minutes before checking.
f The type of lubricant used
depends on the ambient tempera-
ture. Select according to the
table
"FUEL, COOLANT AND
LUBRICANTS".
+ After checking, be sure to tighten
the handle of (G) and (F).
- 40 -
W-04277