Komatsu WA800-1 Operation & Maintenance Manual page 49

OPERATING YOUR MACHINE
TO MOVE THE MACHINE OFF
1. Check that the warning item is
not displayed on the monitor
panel.
2. Free the safety lock for work
equipment control lever. Bring
the work equipment in the travel-
ing posture.
3. Depress right brake pedal (I),
and turn parking brake switch (2)
to OFF (release) to release the
parking brake.
+ When the parking brake is applied
with parking brake switch (2) put
in OFF, put switch (2) to ON and
return it to OFF again.
4. Set speed control lever (3) and
directional lever (4) to the desired
position.
60 - 70cm
5. Release right brake pedal (11,
then depress accelerator pedal
(5) to move the machine off.
A
If the machine has to be started
on a slope, always turn the
transmission cut-off selector
switch to OFF and depress the
left brake pedal. Then depress
the accelerator pedal while
releasing the left brake pedal
to start the machine off slowly.
- 48 -
ww -02041