Komatsu WA800-1 Operation & Maintenance Manual page 29

INSTRUMENTS AND CONTROLS
8. BUCKET CONTROL LEVER
This lever operates the bucket.
@ Tilt
( % 1
@Hold
( s ):
The bucket is kept in the same
position.
@ Dump ( k' 1
*
Tilt
When the bucket control lever is
pulled further from @ position,
the lever is stopped in this posi-
tion until bucket reaches the
preset position of
bucket
positioner,
and the lever is
backed to hold position.
9. SAFETY LOCK
This is used to lock the lift arm
and bucket control levers.
A
When parking or leaving the
machine, or when the perform-
ing maintenance, always lower
the bucket to the ground, put
the work equipment levers in
hold position and check that
safety lock lever is locked.
- 28 -
W-04274