Komatsu WA800-1 Operation & Maintenance Manual page 26

INSTRUMENTS AND CONTROLS
3. DIRECTIONAL LEVER
\\ A
@Forward
@Reverse
4. SPEED CONTROL LEVER
@ Neutral
+ The engine cannot be started if
the directional lever is not at N
(neutral).
*
When operating the directional
1 St
2nd
3rd
This lever is used to change the
direction of travel of the machine.
lever, place your hand on a steer-
ing wheel and operate it by your
fingers.
This lever controls the travel
speed of machine.
This machine has a 3-
FORWARD, 3-REVERSE speed
transmission. Place the speed con-
trol lever in a suitable position to
obtain the desired speed range.
1 st and 2nd speeds are used for
working.
3rd speed are used for traveling.
w-02023
-
25 -