Section 5 System; Service; General Maintenance - ESAB CIGWELD CutSkill 60 Operating Manual

5.01 General Maintenance

Warning!
Disconnect input power before maintaining.
Visual check of
torch tip and electrode
Visually inspect the torch body tip,
electrode, standoff guide and shield cup
Replace all
broken parts
A-13676
0-5574
OPERATING MANUAL

SECTION 5 SYSTEM:

SERVICE

Each Use
Weekly
Visually inspect the
cables and leads.
Replace as needed
3 Months
Clean
exterior
of power supply
6 Months
Visually check and
Carefully clean the
interior
5-1
CutSkill 60
Maintain more often
if used under severe
conditions
Press the water release valve
upward to release water
from the water catchment.
SERVICE