ESAB CIGWELD CutSkill 60 Operating Manual page 4

CutSkill 60
These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the
principles of operation and safe practices for arc welding and cutting equipment, we urge
you to read our booklet, "Precautions and Safe Practices for Arc Welding, Cutting, and Goug-
ing," Booklet 0-5407. Do NOT permit untrained persons to install, operate, or maintain this
equipment. Do NOT attempt to install or operate this equipment until you have read and fully
understand these instructions. If you do not fully understand these instructions, contact
your supplier for further information. Be sure to read the Safety Precautions before installing
or operating this equipment.
This equipment will perform in conformity with the description thereof contained in this manual and accompanying labels and/or
inserts when installed, operated, maintained and repaired in accordance with the instructions provided. This equipment must be
checked periodically. Malfunctioning or poorly maintained equipment should not be used. Parts that are broken, missing, worn,
distorted or contaminated should be replaced immediately. Should such repair or replacement become necessary, the manufacturer
recommends that a telephone or written request for service advice be made to the Authorized Distributor from whom it was pur-
chased.
This equipment or any of its parts should not be altered without the prior written approval of the manufacturer. The user of this
equipment shall have the sole responsibility for any malfunction which results from improper use, faulty maintenance, damage,
improper repair or alteration by anyone other than the manufacturer or a service facility designated by the manufacturer.
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR
OPERATING MANUAL
Be sure this information reaches the operator.
You can get extra copies through your supplier.
CAUTION
USER RESPONSIBILITY
!
OPERATING.
PROTECT YOURSELF AND OTHERS!