ESAB CIGWELD CutSkill 60 Operating Manual page 20

CutSkill 60
3) Gas Purge Screen
Turn the Control Knob clockwise and press when Gas Purge Screen is highlighted to enter Gas Purge
Screen.
Press the Control Knob to turn ON or turn OFF gas purge function. When gas purge is turned ON, air
pressure value is displayed in gas purge section. Gas valve is engaged and compressed air goes through
the plasma torch. Press the Control Knob again to stop gas purge.
4) Home Screen
Turn the Control Knob clockwise and press when Home icon is highlighted to enter Home Screen. Press
the Control Knob again to exit Menu Screen.
4. Torch or Shield Cup Installation Error Screen
Torch or Shield Cup Installation Error Screen displays when torch or shield cup of torch is not installed correctly.
Please switch the Input Supply ON/OFF switch to OFF and check the torch connection or shield cup installation.
INTRODUCTION
Figure 2-16: Gas Purge Screen Selected
Figure 2-17: Gas Purge Selected
Figure 2-18: Torch or Sheild Cup Installation Error Screen
OPERATING MANUAL
460
2-8 0-5574