ESAB CIGWELD CutSkill 60 Operating Manual page 3

WARNING
!
Read and understand this entire Manual and your employer's safety practices before installing,
operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgement,
the Manufacturer assumes no liability for its use.
CIGWELD CutSkill 60 Plasma Cutters
Instruction Manual Number 0-5574 for:
Part Number 1-1601-60
Published by:
CIGWELD Pty Ltd
CIGWELD An ESAB Brand
71 Gower Street,
Preston, Victoria, Australia, 3072
+61 3 9474 7400
www.cigweld.com.au
Copyright 2019
CIGWELD Pty Ltd
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the
publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any
loss or damage caused by any error or omission in this Manual, whether such error
results from negligence, accident, or any other cause.
For Printing Material Specification refer to document 47x1915.
Publication Date: 16-07-2019
Revision Date:
Record the following information for Warranty purposes:
Where Purchased:
Purchase Date:
Equipment Serial #:
OPERATING MANUAL
+61 3 9474 7391
____________________________________
____________________________________
____________________________________
i
CutSkill 60