Installation; Unpacking; Lifting Options - ESAB CIGWELD CutSkill 60 Operating Manual

3.01 Unpacking

1. Use the packing lists to identify and account for each item.
A. Contents List
Description
Power Source
CutSkill 60A Torch
Work Cable and Clamp (3m)
Shoulder Strap
Nitto Air Fitting Nipple, Male Plug - 1/4"
Wrench for Air Filter
Operating Manual
Gouging Tip 60A
2. Inspect each item for possible shipping damage. If damage is evident, contact your distributor and / or ship-
ping company before proceeding with the installation.
3. Record Power Supply and Torch model and serial numbers, purchase date and vendor name, in the information
block at the front of this manual.

3.02 Lifting Options

The Power Supply includes a handle for hand lifting only. Be sure unit is lifted and transported safely and
securely.
WARNING
!
Do not touch live electrical parts.
Disconnect input power cord before moving unit.
FALLING EQUIPMENT can cause serious personal injury and can damage equipment.
HANDLE is not for mechanical lifting.
• Only persons of adequate physical strength should lift the unit.
• Lift unit by the handle, using two hands. Do not use straps for lifting.
• Use optional cart or similar device of adequate capacity to move unit.
• Place unit on a proper skid and secure in place before transporting with a fork lift or other vehicle.
0-5574
OPERATING MANUAL
SECTION 3:

INSTALLATION

Quantity
1
1
1
1
1
1
1
1
3-1
CutSkill 60
INSTALLATION