Table of Contents
Advertisement
10.2 Inspection
Bosch Rexroth recommends documenting the inspection results
• so that considering functionality and economy, the inspection and maintenance
intervals can be adjusted to the actual operating conditions.
• so that by comparing the documented values, you can identify faults at an early
point in time.
▶
Before any inspection work, clean the hydraulic power unit as necessary.
▶
Carry out the following visual inspections for clearly apparent defects:
– Illegible notices or warning signs
– Leakage
– Loose and/or missing parts
– Indications of external force effects
10.3 Warning devices
The "Advanced" and "Premium" configurations of the hydraulic power unit are
equipped with a LED strip for status display:
• Normal operation:
• Warning:
• Error:
Warnings and error displays are realized via the flashing sequence of the LED strip:
1 x flashing:
Oil filter
2 x flashing:
Oil level
3 x flashing:
Oil temperature
4 x flashing:
Oil exchange
5 x flashing:
Other
Precise reading of error messages is possible via the mini USB service interface
and the ConverterWorks or IndraWorksDS software.
LED strip illuminated in green
LED strip illuminated in green and flashing yellow
LED strip illuminated in red and flashing yellow
CytroPac, RE 51055-B/06.17, Bosch Rexroth AG
Maintenance and repair
57/84
Hide quick links:
Advertisement
Table of Contents
