30/84
Assembly
T: G1
Bosch Rexroth AG, CytroPac, RE 51055-B/06.17
Bosch Rexroth recommends using an installation plate. For installation without
installation plate, position the hydraulic power unit on a level surface and use a
damping mat. Make sure that the hydraulic power unit is secured against falling.
▶
Level the hydraulic power unit so that its longitudinal and transverse axes are
horizontal.
7.2.1 Dimensions of the hydraulic power unit
T: G1/2
130
T: G1
P: G1/2
Fig. 6: Dimensions (dimensions in mm)
366
K: G 1/2
130