Table of Contents
Advertisement
General
Installation position
Line connections
▶ Pressure port
▶ Return flow
Place of installation
Ambient temperature range (during operation)
Material
▶ Oil tank
▶ Hood
▶ Central plate
Weight (depending on configuration level) without oil
Hydraulic
Maximum operating pressure
Maximum flow
Oscillating volume
Tank capacity
Maximum return flow via return flow filter
Temperature range hydraulic fluid
Admissible hydraulic fluids
Maximum admissible degree of contamination of the hydraulic fluid,
cleanliness class according to ISO 4406 (c)
Return flow filter
▶ Filter rating
▶ Cold start
▶ Warning
▶ Shutdown
Filling level monitoring
▶ Warning
▶ Shutdown
Temperature
▶ Warning
monitoring
▶ Shutdown
Pump
▶ Minimum flow
▶ Viscosity range
Hydraulic fluid
Mineral oils
The cleanliness classes specified for the components must be adhered to in the hydraulic systems.
1)
Effective filtration prevents faults and simultaneously increases the life cycle of the components.
For the selection of the filters, see www.boschrexroth.com/filter.
16 Technical data
hydraulic fluid
Classification
HLP ISO VG 32
HLP ISO VG 46
For further information and data on the use of other hydraulic fluids, please refer to the data
sheets above or contact us.
vertical
G1/2
G1/2 (via filter)
G1 (2x, direct)
Industrial building; stationary application
°C +10 ... +40
PA66 GF30
PA66 GF30
GG with corrosion protection
kg 60 ... 65
bar 240
l/min See characteristic curves on page 10 of data sheet 51055
l 10
l 20
l/min 35
°C +10 ... +65
See table "Hydraulic fluid" below
Class 20/18/15
Type HC10XL -R00-0-M
µm 10
°C < 10 →maximum flow 10 l/min
% 75
% 100
l 10 (residual volume)
l 7 (residual volume)
°C 60
°C 65
l/min 1
mm
2
/s 12 ... 800 (admissible range, for start at most 2000)
20 ... 100 (recommended range)
Suitable
Standards
sealing materials
NBR, FKM
DIN 51524
CytroPac, RE 51055-B/06.17, Bosch Rexroth AG
Technical data
1)
Data sheet
90220
73/84
Hide quick links:
Advertisement
Table of Contents
