Bosch Rexroth CytroPac Operating Instructions Manual page 4

4/84
Bosch Rexroth AG, CytroPac, RE 51055-B/06.17
7.5.4 Mating connector assignment to port 15X1:
Enable signal 24 VDC (M12 x 1, customer side)
7.5.5 Mini USB service interface 14X1 for frequency converter
("Advanced" and "Premium" configuration)
7.5.6 Multi-Ethernet interfaces
7.6 Electrical interface connection
7.6.1 "Basic" configuration
7.6.2 "Advanced" configuration
7.6.3 "Premium" configuration
7.6.4 All configurations
8 Commissioning
8.1 First commissioning
8.1.1 Before commissioning
8.1.2 Filling the hydraulic system
8.1.3 Activating the power supply
8.1.4 Bleeding the entire hydraulic system of the machine
8.1.5 Commissioning
8.1.6 Flushing the hydraulic system
8.1.7 Common faults during commissioning
8.2 Re-commissioning after longer standstill
8.3 Parameter settings
8.3.1 Digital interface settings
8.3.2 Multi-Ethernet interface settings, PROFINET operating mode
9 Operation
10 Maintenance and repair
10.1 Cleaning and care
10.2 Inspection
10.3 Warning devices
10.4 Maintenance schedule
10.5 Maintenance
10.5.1 Checking the electric components/installation
10.5.2 Filling level monitoring
10.5.3 Oil temperature monitoring
10.5.4 Filter element contamination monitoring (return flow filter)
10.5.5 Visual inspection of the filling and breathing filter (see fig. 1, pos. 6)
10.5.6 Pressure value check
10.5.7 Hydraulic fluid care
10.5.8 Visual inspection for leakage, cracking, force effects and corrosion
10.5.9 Checking the heat exchanger
10.6 Spare and wear parts
11 Decommissioning
11.1 Preparing for decommissioning
11.2 Decommissioning process
12 Disassembly and replacement
12.1 Preparing for disassembly
12.2 Disassembly process
39
40
40
41
42
43
44
44
45
45
45
46
47
47
47
48
49
49
50
51
53
55
56
56
57
57
58
58
58
59
59
60
61
61
61
61
62
63
65
65
65
66
66
66