Operation; Maintenance And Repair; Cleaning And Care; Inspection - Bosch Rexroth 10 Series Instruction Manual

58/72 A10FZO, A10VZO, A10FZG and A10VZG series 10 | Operation
Bosch Rexroth AG, RE 91485-01-B/2021-11-18

9 Operation

This product is a component which requires no settings or changes during
operation. For this reason, this chapter of the manual does not contain any
information on adjustment options. Use the product only within the performance
range specified in the technical data. The machine/system manufacturer is
responsible for proper project planning of the hydraulic system and its control.

10 Maintenance and repair

Overdue inspection and maintenance work!
Property damage!
▶ Perform the specified inspection and maintenance work at the intervals
described in this manual.
10�1 Cleaning and care
Damage to seals and electrical system due to mechanical effects!
The jet of a high-pressure cleaner may damage the seals and electrical system of
the axial piston unit!
▶ Do not point a high-pressure cleaner at sensitive components, e.g. shaft seal,
electrical connections and components.
For cleaning and care of the axial piston unit, observe the following:
▶ Check whether all seals and plug-in connections are securely seated to ensure
no moisture can penetrate into the axial piston unit during cleaning.
▶ Use only water and, if necessary, a mild cleaning agent to clean the
axial piston unit. Never use solvents or aggressive cleaning agents.
▶ Remove major external contamination and keep clean sensitive and important
components, such as solenoids, valves, indicators and sensors.
10�2 Inspection
In order for the axial piston unit to be reliable and long-lasting, Bosch Rexroth
recommends inspecting the hydraulic system and axial piston unit on a regular
basis, and documenting and archiving the following operating conditions:
NOTICE
NOTICE