Table of Contents
Advertisement
50/84
Commissioning
Bosch Rexroth AG, CytroPac, RE 51055-B/06.17
8.3 Parameter settings
Damage to the hydraulic power unit due to improper operation!
Damage to property, malfunction!
▶
Make sure that the parameter settings at the frequency converter are only set by
qualified personnel.
▶
Make sure that only parameters specified in table 6 are modified. Any
modification of other parameters must be coordinated with the Bosch Rexroth
customer service.
If no customer-specific requirements apply, the CytroPac is delivered with factory
settings. See name plate in chapter 5.5.
The CytroPac is equipped with an integrated Rexroth EFC 5610 frequency
converter with the ASF firmware (Sytronix) for connection to an external PC via
mini USB cable. The frequency converter can be accessed and configured via the
ConverterWorks or IndraWorksDS software.
The software is available for download on the Bosch Rexroth website. See chapter
17.3 "Accessories". Also observe the help functions of the software.
Consult the Sytronix quick guide, see chapter 1.2 "Required and amending
documentation".
For parameter settings, proceed as follows:
1.
Connect the hydraulic power unit to the voltage supply.
Please note the information provided in chapter 8.1.3 "Activating the power
supply".
2.
Connect the hydraulic power unit with a mini USB cable via interface 14X1 to an
external PC.
3.
Open the ConverterWorks or IndraWorksDS software.
4.
Switch the connection online.
5.
Modify the required parameters.
6.
Document the modifications made (e.g. by saving the parameter set).
NOTICE
Hide quick links:
Advertisement
Table of Contents
