General Safety Instructions - Bosch Rexroth CytroPac Operating Instructions Manual

12/84 Safety instructions
Bosch Rexroth AG, CytroPac, RE 51055-B/06.17

2.5 General safety instructions

• Observe the valid regulations on accident prevention and environmental protection.
• Observe the safety regulations and provisions of the country in which the product
is used/applied.
• Exclusively use Rexroth products in technically perfect condition.
• Observe all notices on the product.
• Persons assembling, operating, disassembling or maintaining Rexroth products
must not be under the influence of alcohol, other drugs or medications influencing
the ability to react.
• Only use accessories and spare parts approved by the manufacturer in order to
exclude hazards to persons due to unsuitable spare parts.
• Comply with the technical data and environmental conditions specified in the
product documentation.
• The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating conditions when being used which in turn
could cause personal injuries and/or damage to property. Therefore, only use
a product for safety-relevant applications if this use is expressly specified and
permitted in the documentation of the product, e.g. in explosion-protected areas or
in safety-related parts of control systems (functional safety).
• Do not commission the product until you can be sure that the end product (for
example a machine or system) where the Rexroth product is installed complies
with the country-specific provisions, safety regulations and standards of the
application.
• Only persons who have been authorized by the machine end-user may be granted
access to the direct operating range of the machine/system. This also applies
during any standstill of the machine/system.