Table of Contents
Advertisement
74/84
Technical data
Electric
Line connection
▶ Performance class
▶ Voltage (according to IEC 60038)
▶ Frequency
Protection class according to DIN EN 60529
Maximum fuse
▶ Power 1.5 kW
(on the customer side)
▶ Power 2.2 kW
▶ Power 3.0 kW
▶ Power 4.0 kW
▶ Supply line cross-section
Control port
▶ Voltage
▶ Maximum fuse
Characteristic:
Circuit breakers A, B, C, Z
Micro-fuses FF, F, M, T
▶ Supply line cross-section
1)
Only with suitable connectors or protective caps, see chapter 17.3 "Accessories".
Cooling water
Cooling
▶ Flow
water supply
▶ Inlet temperature
requirements
▶ Ports
▶ Maximum glycol content
▶ Maximum cooling water pressure
Bosch Rexroth AG, CytroPac, RE 51055-B/06.17
max. A 10
max. A 16
max. A 20
max. A 20
max. mm
max. A 1
max. mm
l/min > 10
The cooling water supply for cooling the motor and the frequency converter must
always be activated before the operation. It must be ensured that the cooling
water supply temperature does not fall below the dewpoint of the ambient air of
the power unit.
Use of other coolants possible after consultation.
kW 1.5; 2.2; 3.0; 4.0
V 380 ... 480 AC (-15% / +10%)
Hz 50/60
IP 54
1)
2
2.5
VDC 24 ±5%
0.34 (up to a length of 5 m, 0.25 is possible)
2
°C 15 ... 25
G1/2 (2x)
% 30
bar 30
Hide quick links:
Advertisement
Table of Contents
