6.1.3 Transport using lifting gear
For transport, the hydraulic power unit can be connected to lifting gear.
For lifting and transport of the hydraulic power unit, proceed as follows:
1.
Make sure that the lifting gear's lifting capacity is sufficiently dimensioned in
order to safely bear the weight of the hydraulic power unit.
2.
Use the pre-assembled eyebolt at the hydraulic power unit for transport.
See fig. 5.
3.
Make sure that the eyebolt is securely tightened.
4.
Make sure that the cover is closed during transport. See fig. 5.
5.
Attach a suitable lifting gear to the eyebolt.
6.
Attach the lifting gear to a crane hook.
7.
Slowly and carefully lift the hydraulic power unit in order to avoid swinging.
Fig. 5: Eyebolt
Transport and storage
CytroPac, RE 51055-B/06.17, Bosch Rexroth AG
27/84