Commissioning; Instructions For The User; Decommissioning; Environmental Protection And Disposal - Bosch Stora BP 200 EK Installation And Service Instructions Manual

6

Commissioning

NOTICE
System damage due to positive pressure!
▶ Observe the maximum operating pressure (tab. 19, page 19).
Commissioning must be performed by an approved contractor.
▶ Check the tightness of all connections ( Fig. 15, page 39).
▶ Commission all assemblies and accessories as specified in the
manufacturer's technical documentation.
6.1

Instructions for the user

▶ Explain the operation and handling of the heating system and
cylinder, making a particular point of safety-relevant features.
▶ Point out the need for regular maintenance, as the function and
service life depend on this. The cylinder itself is maintenance-free.
▶ When there is a risk of frost and decommissioning is necessary,
drain the cylinder completely, including the lower section of the
container.
▶ Explain the function and how to check the pressure relief valve.
▶ Hand all enclosed documents over to the user.
7

Decommissioning

DANGER
Risk of scalding from hot water!
Hot water can cause serious burns.
▶ Allow the cylinder time to cool down following decommissioning.
NOTICE
Cylinder damage from frost!
If there is a risk of frost when you are away from home, we recommend
the following:
▶ Leave the cylinder in operation.
or
▶ Take the cylinder out of operation and drain it.
▶ If an immersion heater has been installed (accessory), isolate the
cylinder from the power supply.
▶ Switch off the temperature controller at the control unit.
▶ Drain the cylinder completely.
▶ Decommission all assemblies and accessories of the heating system
as specified in the manufacturer's technical documentation.
▶ Open the system drain valve.
▶ For ventilation, open the air vent valve. The air vent valve is located at
the top of the cylinder.
▶ Close the shut-off valve.
To prevent corrosion:
▶ Leave the connector pipes open, so that the interior can dry out well.
Stora – 6721835329 (2021/04)
8

Environmental protection and disposal

Environmental protection is a fundamental corporate strategy of the
Bosch Group.
The quality of our products, their economy and environmental safety are
all of equal importance to us and all environmental protection legislation
and regulations are strictly observed.
We use the best possible technology and materials for protecting the
environment taking account of economic considerations.
Packaging
Where packaging is concerned, we participate in country-specific
recycling processes that ensure optimum recycling.
All of our packaging materials are environmentally compatible and can
be recycled.
Used appliances
Used appliances contain valuable materials that can be recycled.
The various assemblies can be easily dismantled. Synthetic materials are
marked accordingly. Assemblies can therefore be sorted by composition
and passed on for recycling or disposal.
9

Inspection and maintenance

Apart from visual inspections, no particular maintenance or cleaning of
the cylinders is necessary.
▶ Check all connections externally for leaks once a year.
▶ In the event of a fault, contact an approved contractor or customer
service.
10

Data Protection Notice

We, Bosch Thermotechnology Ltd., Cotswold Way,
Warndon, Worcester WR4 9SW, United Kingdom
process product and installation information,
technical and connection data, communication data,
product registration and client history data to provide
product functionality (art. 6 (1) sentence 1 (b)
GDPR), to fulfil our duty of product surveillance and for product safety
and security reasons (art. 6 (1) sentence 1 (f) GDPR), to safeguard our
rights in connection with warranty and product registration questions
(art. 6 (1) sentence 1 (f) GDPR) and to analyze the distribution of our
products and to provide individualized information and offers related to
the product (art. 6 (1) sentence 1 (f) GDPR). To provide services such as
sales and marketing services, contract management, payment handling,
programming, data hosting and hotline services we can commission and
transfer data to external service providers and/or Bosch affiliated
enterprises. In some cases, but only if appropriate data protection is
ensured, personal data might be transferred to recipients located
outside of the European Economic Area. Further information are
provided on request. You can contact our Data Protection Officer under:
Data Protection Officer, Information Security and Privacy (C/ISP),
Robert Bosch GmbH, Postfach 30 02 20, 70442 Stuttgart, GERMANY.
You have the right to object, on grounds relating to your particular
situation or where personal data are processed for direct marketing
purposes, at any time to processing of your personal data which is based
on art. 6 (1) sentence 1 (f) GDPR. To exercise your rights, please contact
us via privacy.ttgb@bosch.com To find further information, please
follow the QR-Code.
Commissioning
21