Table of Contents
Advertisement
44/84
Assembly
Bosch Rexroth AG, CytroPac, RE 51055-B/06.17
7.6.3 "Premium" configuration
In "Premium" configuration, all ports are used.
13
14
15
Fig. 21: "Premium" configuration electrical connections
To connect the power supply, proceed as follows:
▶
Connect the connector plug for the enable interface (15X1) with the superior
machine control system via port pos. 12.
▶
Connect the connector plug for the feed-in/voltage supply (12X1) to port pos. 11.
▶
Connect the connector plug for the multi-Ethernet interface (21X1) to the
superior machine control system with port pos. 15.
Only use suitable connectors in compliance with the required protection class.
Refer to chapter 17.3 "Accessories".
▶
Close any unused interfaces with the respective protective cap.
7.6.4 All configurations
To connect the mini USB service interface (14X1, port pos. 13), proceed as follows:
▶
Connect the hydraulic power unit with a mini USB cable (Bosch Rexroth
recommends a shielded cable with ferrite ring) via the mini USB service interface
to a PC.
The CytroPac is equipped with an integrated EFC 5610 frequency converter for
connection to an external PC via mini USB cable.
The frequency converter can be accessed and configured via the ConverterWorks or
IndraWorksDS software.
The software is available for download on the Bosch Rexroth website. See
chapter 17.3 "Accessories".
11
16
12
Hide quick links:
Advertisement
Table of Contents
