Inspection And Maintenance; Preventive Maintenance - Bosch EL-53000 Parts List And Operating Instructions

WARNING: To prevent personal injury,
•
Only certified technicians shall perform inspections and repairs to this device.
•
Before each use, inspect this device for bends, cracks, dents, elongated holes, or missing hardware.
If damage is found, discontinue use.
•
Use only those repair parts called out in the parts list in this document. Items found in the parts
list have been carefully tested and selected.
Inspection
Before each use, a certified technician must inspect this device for bends, cracks, dents, elongated
holes, or missing hardware. If damage is found, discontinue use.
Repair
When repairing this device, use only those repair parts called out in the parts list in this document.
Items found in the parts list have been carefully tested and selected.
Disposal
At the end of the useful life of this device, dispose of the components according to all state, federal,
and local regulations.

Preventive Maintenance

WARNING: To prevent equipment damage that could result in
personal injury, follow all maintenance/replacement guidelines.
Vertical adjustment screws and pivot joints are high wear locations. The following
maintenance and replacement schedules MUST be adhered to:
• Grease every 200 uses (or 3 months). When cart is empty, apply grease directly to
the threads of the 4 vertical adjustment screws and run the screws up and down to
ensure complete coverage. Use grease zerks to lubricate the 4 pivot joints.
See Figure 10.
• Replace all the vertical adjustment screw components every 5 years to ensure
optimal function of the cart is maintained. See service kits SP04521323 and
SP04521324. For full replacement order two of each kit.
• Rubber skid pad is a non-conductive surface between the battery and the fixture. To
reduce wear and tear on rubber skid pads:
1) Apply all loads slowly and carefully
2) Limit horizontal movement of any applied load with straps.
• If rubber pads are ripped, torn, or exposing
metal, order replacement
kit# SP04521322.
Vertical
Adjustment
Screw (X4)
(Apply grease to
threads and run
screws up and
down to distribute
grease.)

Inspection and Maintenance

© Bosch Automotive Service Solutions Inc.
Pivot Joint
Grease Zerk (X4)
Figure 10
SP04525036 Ver. 01
Page 7 of 10