Controlling/Outputting Through Parallel Communication; Setting Communication Specifications (Parallel Interface) - Omron FZ3 Series User Manual

Controlling/Outputting through Parallel Communication

This section describes how to set communication specifications and the I/O format required when
communicating with external devices through a parallel interface.

Setting Communication Specifications (Parallel Interface)

Set the controller communication specifications.Use the same communication specification settings for
the controller and the external device.
Note
During setting of communication specifications, input signals cannot be handled.However, the input status can
●
be checked with [Confirmation].
Reference:
6
1.
On the Main screen, tap [System] - [Communication] - [Parallel].
The Parallel window is displayed.
2.
Tap [Setting] to set communication specifications.
178 Controlling/Outputting through Parallel Communication
Checking Communication Status (Parallel Interface) (p.180)
FZ3 User's Manual