Table of Contents
Advertisement
<Response format>
When processing is performed normally
When processing is not performed normally
Note
If DATASAVE command is executed when using scene groups 1 to 31, system data is saved on the controller's
●
flash memory and scene group data is saved to the USB memory. If there is no USB memory plugged in, ER is
returned.
Do not turn off power to the controller until there is a response.
●
DATE
Acquiring date and time
Acquires the date and time from the internal calendar timer in the controller.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
The acquired date and time are output as a response.
Year: 4 digits
Month: 2 digits
Year/Month/Date/
Date: 2 digits
Hour/Minute/Second
Hour: 2 digits
Minute: 2 digits
Second: 2 digits
FZ3 User's Manual
Controlling/Outputting through Serial Communication (Non-procedure)
6
155
Advertisement
Table of Contents
